Toilet supply line hook up

toilet supply line hook up

How do you connect a toilet supply line to a tank?

One end of a toilet supply line is much larger than a sink line. Start the fittings onto the proper male threads at the valve and toilet. The large end goes under the toilet tank. Use two wrenches when you tighten the fittings, you dont want put stress on the valve and get it leaking.

What size is a toilet water supply line?

Toilet water supply line come in three styles. Most of the time, you have a 3/8 fitting at the shut off valve and a 7/8 fitting at the toilet tank. Do you have a different Problem?

How long does it take to install a toilet water supply line?

A more popular choice in recent history is a flexible line with factory installed fittings. Since the line is flexible you can move it as needed for proper alignment. The fittings screw onto the valve and toilet tank without any additional parts. Simple, less than ten minutes to install one of these. Toilet water supply lines come in two styles.

What is the difference between a toilet supply line and sink?

One end of a toilet supply line is much larger than a sink line. Start the fittings onto the proper male threads at the valve and toilet. The large end goes under the toilet tank.

How do you replace the supply line on a toilet tank?

Use a wrench to loosen the supply line nut connecting to the supply valve. Then do the same to the nut connecting to the toilets fill valve. That connection will be on the underside of the tank and you may need another towel handy as some water may still drip out of the old supply line.

Where does my toilet water supply line connect to?

Your toilet water supply line connects to your homes water supply and to the toilet tank. Do you have a different Problem? See Plumbing Repair or How to Fix a Toilet for a complete listing of related topics.

How do you install a toilet with a tubular supply?

Use a hack saw to cut the tubing to length. Get a new nut and ferrule for the end that goes into the valve and a large nut for the closet connection. Make sure the supply line you buy is for a toilet and not a sink, they are different. Put the nut, then the ferrule on the line and start the tubing into the valve.

How do you attach a rubber washer to a toilet tank?

NOTE: The rubber washer and coupling nut (42397) is included with your toilet tank. Slide the coupling nut onto the rigid supply line. Connect the rigid supply line to the supply stop. Slide the coupling nut to the top of the rigid supply line. Press the rubber washer into the coupling nut.

What is a toilet supply line?

What does it look like? The toilet supply line supplies cold water to the toilet tank. The supply line is arguably the most important part of a toilet, as without it the toilet would have no access to water to flush, cycle, or refill.

What is the difference between a sink plunger and a toilet plunger?

Sink plungers are shaped differently and used in a different way. In fact, many people use plungers for toilets that are actually sink plungers. In this article, we’ll teach you how to recognize a sink plunger, why it’s very bad to get sink and toilet plungers mixed up, and how to use it to get your sink working again fast. It’s all in the flange.

How to tighten a toilet water supply line?

A flexible toilet water supply line is a little easier to tighten. It is still a good idea to use two wrenches. This is just to make sure that you dont damage anything else.

What is the difference between plastic and stainless steel toilet supply lines?

Plastic lines are less expensive and are usually white. Stainless steel lines cost a little more. The steel lines are still flexible and are a little tougher. Flexible toilet supply lines have factory installed ends on them.

Related posts: