How do you hook up a trolling motor circuit breaker

how do you hook up a trolling motor circuit breaker

How do you wire a 24-volt trolling motor?

When you’re wiring a 24-volt trolling motor, it’s important that you first connect to the circuit breaker (which should only be four inches from the battery. You will want to connect the positive lead of the trolling motor to the positive terminal on the circuit breaker.

What size circuit breaker do I need for a trolling motor?

The Amp rating of a circuit breaker should be slightly above the maximum amp draw of your trolling motor. For instance, if your motor draws a maximum of 55 Amps, you should pick a 60 Amp circuit breaker for your wiring. The next thing to check is that a circuit breaker works with the voltage of your motor.

Why does my trolling motor trip the circuit breaker?

Circuit breakers prevent this from happening. If your trolling motor experiences an overload or a short circuit, the circuit breaker will be the first thing that receives this surge of electricity. As a result, it will trip or get turned off.

Do you need a fuse for a trolling motor?

For starters, you do not need to keep replacing a circuit breaker every time your trolling motor experiences an electrical fault. It can also be reset manually. A fuse, on the other hand, can provide protection only once. Replacing a fuse can also be very inconvenient.

What size battery do I need for a 24 volt trolling motor?

A 24 volt trolling motor can use any number of batteries that adds up to 24 volts. Typically this setup will include two 12 volt batteries. When you connect two 12 volt batteries in series, you will have 24 volts at the same amp-hour rating as one battery rating.

Can you wire a 24 volt motor to a battery?

Wiring a 24 volt motor is a simple task that most people can handle. After attaching your motor to your boat and placing your batteries, your next step will plan out your wiring. Making a wiring schematic is a great place to start. You can wire your trolling motor to your battery in some cases, and your project is done.

How to wire a trolling motor to a circuit breaker?

If you are using a circuit breaker, you first need to connect to it by connecting the positive lead of the trolling motor cable to the positive part on the circuit breaker. Then connect the negative lead of the motor cable from your circuit breaker to the positive part of your first battery.

How do I wire the battery to the motor?

Once you confirm that the batteries are functional, use the following steps to wire the motor: Arrange the batteries side by side. The positive terminal of battery one should be next to the negative terminal of battery two. Use the battery connector cable or jumper wire to link the batteries.

Do you need a circuit breaker for a trolling motor?

If you use your trolling motor in the United States, you must have either a circuit breaker or a fuse. The U.S. Coast Guard requires them for any ungrounded current-carrying conductor. Do you need a different circuit breaker for different brands of trolling motors?

How many amps does a trolling motor use?

Yes, both weather and water will impact the time your trolling motor can work at one battery charge. If your boat can move at a standard speed using only 10 amps in good weather, if there are strong winds and a slight storm, you may need 20 amps or more.

How do you hook up a trolling motor to a battery?

One will be connected to the trolling motor while the other will be connected to the battery. Connect the positive power cable of the trolling motor to the terminal that has been labeled “AUX” on the breaker. Connect the terminal labeled as “BAT” on the breaker to the positive end of the battery post.

How long does a trolling motor last?

Now, you can find out how long your trolling motor will work: Example: You have a 100-hour battery in a motor that gives 30 amps at a standard speed. Using the formula, you’ll get 3.3 hours. This is for one full charge of the battery. Why is this tricky?

Related posts: