Dating sessions clocks

dating sessions clocks

How do you date sessions clocks?

The peak period of production for the Sessions Clock Company was from 1903 to 1930. At first, Sessions simply continued to produce Welch clocks, notably the black mantel clock and the oak-cased kitchen clock. To date these clocks, collectors needn’t look past the label. If it was made before 1903, the label will read “E.N. Welch.”

When did the Sessions Clock Company start making clocks?

On January 9, 1903, the company was reorganized as The Sessions Clock Company. Within a few years the Sessions Clock Company was producing clock movements, cases, dials, artwork and castings for their line of mechanical clocks.

How to date antique clocks?

Dating Antique Clocks can be an exact science providing you have the right reference books and the proper experience. However, if you don’t there are various little things that can help when dating antique clocks. Like knowing when certain features were introduced or certain materials became available.

Why did sessions stop making clocks?

The Great Depression caused Sessions to cease production of spring-wound clocks altogether in 1936, and, during World War II, the Sessions plant devoted itself to the manufacture of war materials. After the war, Sessions shifted gears again by making cheap electric alarm clocks and kitchen clocks.

When did the Sessions Clock Company start making clocks?

On January 9, 1903, the company was reorganized as The Sessions Clock Company. Within a few years the Sessions Clock Company was producing clock movements, cases, dials, artwork and castings for their line of mechanical clocks.

Why did sessions stop making clocks?

The Great Depression caused Sessions to cease production of spring-wound clocks altogether in 1936, and, during World War II, the Sessions plant devoted itself to the manufacture of war materials. After the war, Sessions shifted gears again by making cheap electric alarm clocks and kitchen clocks.

How can you tell how old a clock is?

A man with a clock always knows the time. A man with two clocks is never sure. You can roughly date them by the little regulator at top of the back plate. Early ones have one screw. Mid ones have two screws and a single vertical slide rod. Late ones have two screws and double slide rods.

How to tell if a clock is real or fake?

The data base is pretty small for Sessions clocks but I have seen good IDs and dates given on clocks similar to yours. Be patient, good things will happen. Often theres a date on the case or label. Look for something like that. A man with a clock always knows the time.

What happened to the Sessions Clock Company?

In 1956, Sessions was absorbed by a company interested mainly in their timing devices. In 1959, William K. Sessions, grandson of William E. Sessions left the Sessions Clock Company and formed the New England Clock Company. In 1960, one of the Sessions Clock buildings was sold to the Bristol Instrument Gears Company.

When did sessions start making electric clocks?

In 1930, the company expanded to produce electric clocks and timers for radios, while continuing to produce traditional brass mechanical movements. Beginning at the end of World War II Sessions W Model (electric) was widely used by various casting companies for their clocks. The dial of the W Model read Movement by Sessions.

When did they stop making mechanical clocks?

Welch Company, the William L. Gilbert Clock Company, and the Waterbury Clock Company collectively produced most of the mechanical clocks made in America between the mid-19th century and 1950. At about 1935, Sessions ended its production of mechanical clocks and produced electrical clocks exclusively.

When did Seth Thomas stop making clocks?

In 1930 a holding company named General Time Instruments Corporation was formed to unite Seth Thomas Clock Company with Western Clock Company. In 1955, a flood badly damaged the Seth Thomas factory. They phased out movement manufacturing and began importing many movements from Germany.

Related posts: