Dating disston saws

dating disston saws

How do you date a Hamilton Disston Saw?

We can date pre-Hamilton Disston saws to a 25-year period (marked H. Disston, 1840-65), post-Hamilton saws (marked and Son, 1865-71), and post-Albert saws (marked and Sons, after 1871). We can identify saws made after 1875 because they have domed cap screws instead of split nut fasteners. One medallion has the 1887 Glover patent date on it.

How do I identify a Disston hand saw?

This medallion is found on Disston saws made both before and after the major product line change of 1928. Because of changes in the saws etches, the manufacturing date of saws with this medallion can be identified as being either before or after 1928. All handsaws were made after 1928 have a letter D in the name, for example: D-7, D-8, D-12.

When did the Disston and son saw come out?

Often saws from the mid to late 1860s feature a Disston and Son etch on the blade and the earlier eagle medallion with only Henry Disstons name. The materials that were in stock were used even if the names on them were not up-to-date. One son medallion, 1865-71. This is found more frequently than the previous medallion.

What do the medallions on Disston saws mean?

The medallions on Disston saws give the most accurate indication of manufacturing dates for handsaws, panel saws, and backsaws. The first complete timeline of Disston handsaws was written by Pete Taran and published in the Winter 2001 issue of the Fine Tool Journal.

Do Disston saws have a date stamped on the handle?

For a short time in the 1870s and 80s, some Disston saws had patent dates stamped into the handle. Every other date must have been derived by a medallions presence on a saw that was introduced or discontinued by a certain date, as evidenced by its appearance in or disappearance from the product line in a dated catalog.

How long is a Henry Disston&Sons Philada crosscut saw?

An old Henry Disston & Sons Philadelphia crosscut hand saw, fitted with a decorative shaped Beech handle. The medallion is marked H. Disston & Sons, Philada TPI: 6 Blade length: 26 Condition: the blade is straight, all teeth present, the saw would benefit from a sharpen, the top han...

When did the Disston and son saw come out?

Often saws from the mid to late 1860s feature a Disston and Son etch on the blade and the earlier eagle medallion with only Henry Disstons name. The materials that were in stock were used even if the names on them were not up-to-date. One son medallion, 1865-71. This is found more frequently than the previous medallion.

How old is this Henry Disston back saw?

Henry Disstons backsaw design changed dramatically over a span of five to eight years during the 1840s. This handle from a 16 saw has typically English full cheeks and a hook at the top, front of the handle. Baker estimates the date of this saw to 1842.

Do all Disston saws have medallions?

Probably 90% of Disston saws that collectors find will have one of the medallions shown from this point down to the bottom of the page. By 1900 Disston was making more saws than any other manufacturer worldwide, and their share of the market increased each year.

How can I tell how old my Disston Saw is?

For the most accurate timeline of Disston saw medallions, consult the second editionof this article. The medallions on Disston handsaws changed more over time than any other feature on the saw. By using the medallion, you can estimate the age of your saw. The Medallions and Timeline of Saw Manufacture

What is This medallion from a hand saw?

This medallion from a handsaw is different from those above and below it in that it is from a full-sized saw. It measures approximately one inch in diameter. Its detail is remarkable and the condition is the best that is to be found. The left medallion, from an 1840s No. 7 panel saw, reads H. Disston. Philada.

What is a Disston and son saw?

Often saws from the mid to late 1860s feature a Disston and Son etch on the blade and the earlier eagle medallion. That feature predates the introduction of the one-son medallion.

Related posts: