Dating concrete

dating concrete

How does ready mix concrete get to the site?

If the site is on the other side of the house or building, the ready mix truck may pour into wheel barrows or a concrete pump to get the wet concrete to the site. The contractor and crew will pour wet concrete into the forms until they are full to the top edge.

How to calculate concrete?

How to calculate concrete: Determine how thick you want the concrete. Measure the length and width that you’d like to cover. Multiply the length by the width to determine square footage. Convert the thickness from inches to feet. Multiply the thickness in feet by the square footage to determine ...

How do I choose the best concrete mix for my project?

For very small projects, such as setting a mailbox post or doing repairs, you may want to purchase a packaged concrete mix. Such a mix combines cement, sand, and gravel in the correct mixing ratios and requires only the addition of water to create fresh concrete.

What should I look for when buying a concrete form?

Forms should be in good condition, be set to provide the proper slope or grade for drainage, and form clean corners where they meet each other or other structures. Read about concrete forms. If youre using bagged concrete purchased at a home center, mix the concrete with water according to the package instructions.

How is ready mix concrete delivered?

Ready-mix concrete is normally delivered in two ways. First is the barrel truck or in–transit mixers. This type of truck delivers concrete in a plastic state to the site. Second is the volumetric concrete mixer. This delivers the ready mix in a dry state and then mixes the concrete on site.

What are the factors that affect the ready mix concrete?

The time of delivery, quality checks and time of placements affects the ready mix concrete. Ready mix concrete is a concrete which is manufactured as per required mix ratio in batching plant,and then is transported to construction site on continuously mixing trucks. Ready Mix Concrete placement methods include following basic principles: 1.

Why is it important to inspect and test ready mix concrete?

Inspection and testing of ready mix concrete is crucial to ensure that all specified conditions meet the acceptable criteria. Ready mix concrete, which produced in batching plant and transported to construction site by truck mounted mixers, are commonly inspected and tested in accordance with applicable standards such as ASTM international.

Is ready-mix concrete better for construction projects?

To conclude, ready-mix concrete is usually better for most construction projects despite the increasing costs. It offers a much higher quality, including a variation between batches during concrete preparation in the plant environment.

How do I choose the best concrete form for my project?

The best form for a particular project is often a function of the pour size, the amount of concrete the form needs to retain, and the pressure or weight that will be pushing against the form. For example, the typical concrete forms used for flatwork (such as a patio, driveway, sidewalk or road) range in height from 3 to 12 inches.

What are the different uses of concrete forms?

Other common uses for concrete forms include pouring a simple concrete slab to act as the foundation for a shed or workshop, securing the posts of a fence or a gate in the ground with a concrete base, or making simple paving stones for the yard with a shallow formwork mold.

How do I know if my Portland cement is dry?

Portland cement is the active ingredient in concrete, and cement needs sufficient moisture to cure with full strength. If troweling a sample pile of concrete doesn’t create a smooth, wet, muddy surface in three strokes of the trowel, your concrete is probably too dry. 4 / 13

How strong does concrete formwork need to be?

In order for a concrete formwork to be suitable for a construction project, it needs to be strong enough to hold the weight of the concrete without slipping, cracking, or bending. Any significant damage to the formwork will allow the concrete to pour out, or it may just ruin the intended shape if the concrete is partially cured.

Related posts: